How To Manage An Asbestos Problems

If the asbestos material is in good shape and will not be disturbed, do nothing! If it is a problem, there are two types of corrections: repair and removal. 

REPAIR usually involves either sealing or covering asbestos material. 

Sealing (encapsulation) involves treating the material with a sealant that either binds the asbestos fibers together or coats the material so fibers are not released. Pipe, furnace, and boiler insulation can sometimes be repaired this way. This should be done only by a professional trained to handle asbestos safely.  

Covering (enclosure) involves placing something over or around the material that contains asbestos to prevent release of fibers. Exposed insulated piping may be covered with a protective wrap or jacket. 

With any type of repair, the asbestos remains in place. Repair is usually cheaper than removal, but it may make later removal of asbestos, if necessary, more difficult and costly. Repairs can either be major or minor. 

If you have ever been exposed to asbestos directly or indirectly, you may need an attorney specializing in the field of Asbestos and Asbestos related litigiation. Contact an Asbestos Lawyer in New Mexico now and obtain a free case review!

	Did You Know?
	There are detailed Asbestos exposure monitoring standards Except for brake and clutch repair where a "preferred" control method is used, each employer who has a workplace or work operation covered by this standard must assess all asbestos operations for their potential to generate airborne fibers. Where exposure may exceed the PEL, employee exposure measurements must be made from breathing zone air samples representing the 8-hour TWA and 30-minute EL for each employee.